We are not able to use the listen function. In fact, only the dial button actually works.

Here is my manager.conf:
;
; Asterisk Call Management support
;
[general]
enabled = yes
port = 5038
bindaddr = 127.0.0.1

[admin]
secret = amp111
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = all,system,call,log,verbose,command,agent,user,originate
write = all,system,call,log,verbose,command,agent,user,originate

#include manager_additional.conf
#include manager_custom.conf

I run fop2 in debug mode and get "permission denied" when I try the buttons. The only one that works is the dial button. What else needs to be added here to make this work?

127.0.0.1 -> Action: Originate
127.0.0.1 -> Channel: SIP/742
127.0.0.1 -> Application: ChanSpy
127.0.0.1 -> Data: SIP/737
127.0.0.1 -> Async: True

127.0.0.1 <- Response: Error
127.0.0.1 <- Message: Permission denied
127.0.0.1 <- Server: 0
Thank You!!

I'm using the fop2 admin module to add users. Here is fop2 section regarding users. Do I need to add something here?

;user=620:1234:all:queues
;user=621:1234:dial,transfer,pickup:deptA
;user=622:1234:all
;user=623:1234:meetme,pickup
;buttonfile=buttons.cfg
; ------ END SAMPLE ------

; This line is NOT commented, it executes
; the autoconfig configuration for FreePBX
#exec autoconfig-users-freepbx.sh

This is on the top:

AMI definitions
manager_host=localhost
manager_port=5038
manager_user=admin
manager_secret=amp111

Ok. I found another admin user in _additional and the permissions did not say "originate". Should I delete the user in _additional or just add the correct permission? Thank You...

Ok... deleted that _additional and it worked immediately. Thanks again Nicolas!

hello everyone
i'm having the same problem here, "permission denied", but i don't know where to locate the files _custom and _additional you are talking about... could anyone help on this issue please?

i also have a question, is it possible for FOP to retrieve users info from mysql database? since i'm using dynamic database with asterisk, the "sip.conf" file is empty, so FOP is listing no users. any how to change this?

thank you

hello, thanks for your response
in fact, i get "permission denied" messages for commands issued by the fop server when starting up, so i get these messages even before i log in to the fop client. the connection is established with asterisk, but for certain commands asterisk is denying access, the commands' IDs sent by FOP server are:
127.0.0.1 -> ActionID: parkedcalls
127.0.0.1 -> ActionID: meetme_10
127.0.0.1 -> ActionID: astdb-DND-SIP/left
127.0.0.1 -> Command: sip show peers
127.0.0.1 -> ActionID: iaxpeers
127.0.0.1 -> ActionID: sccppeers

for all the above, asterisk returns the following response:
127.0.0.1 <- Response: Error
127.0.0.1 <- ActionID: sccppeers ;of course the action ID in the response isn't the same for every command
127.0.0.1 <- Message: Permission denied
127.0.0.1 <- Server: 0

so i ignored these errors, and started the client. it shows the pannel, but i'm having trouble with the password :oops:
anyways, the read and write rights in the manager.conf are as follows:

deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = system, call, log, verbose, command, agent, user
write = system, call, log, verbose, command, agent, user

no idea what could be the problem :?
thanks

i forgot to mention that i'm using fop 0.30, not fop2

ok it works well now, apparently i forgot to append "all" and "originate" rights to read and write. i also changed the password from the config file.

so i still have one problem, FOP isn't "seeing" users since they are binded to asterisk from a realtime mysql database, do you have any idea how can this be fixed?
thank you

hello

in fact i'm not using freepbx, so i would have to write the conf files myself. i will check where to find examples and build on them

thanks for ur reply

so as i stated before, i'm using FOP not FOP2, therefore i don't know in which file should i execute my script :?