when I run the command netstat -lnp and I stop the fop2, I don't see the port in listens for another program

tcp 0 0 127.0.0.1:2208 0.0.0.0:* LISTEN 2640/hpiod
tcp 0 0 0.0.0.0:993 0.0.0.0:* LISTEN 2813/dovecot
tcp 0 0 0.0.0.0:995 0.0.0.0:* LISTEN 2813/dovecot
tcp 0 0 0.0.0.0:389 0.0.0.0:* LISTEN 2570/slapd
tcp 0 0 0.0.0.0:646 0.0.0.0:* LISTEN 2160/rpc.statd
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 2784/mysqld
tcp 0 0 0.0.0.0:5038 0.0.0.0:* LISTEN 2972/asterisk
tcp 0 0 0.0.0.0:110 0.0.0.0:* LISTEN 2813/dovecot
tcp 0 0 0.0.0.0:143 0.0.0.0:* LISTEN 2813/dovecot
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 2120/portmap
tcp 0 0 0.0.0.0:2000 0.0.0.0:* LISTEN 2972/asterisk
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 2677/cupsd
tcp 0 0 0.0.0.0:1720 0.0.0.0:* LISTEN 2972/asterisk
tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN 2879/master
tcp 0 0 127.0.0.1:2207 0.0.0.0:* LISTEN 2645/python
tcp 0 0 :::7777 :::* LISTEN 3301/java
tcp 0 0 :::993 :::* LISTEN 2813/dovecot
tcp 0 0 :::9090 :::* LISTEN 3301/java
tcp 0 0 :::9091 :::* LISTEN 3301/java
tcp 0 0 :::995 :::* LISTEN 2813/dovecot
tcp 0 0 :::389 :::* LISTEN 2570/slapd
tcp 0 0 :::5222 :::* LISTEN 3301/java
tcp 0 0 :::5223 :::* LISTEN 3301/java
tcp 0 0 :::5229 :::* LISTEN 3301/java
tcp 0 0 :::110 :::* LISTEN 2813/dovecot
tcp 0 0 :::1935 :::* LISTEN 2928/java
tcp 0 0 :::9999 :::* LISTEN 2928/java
tcp 0 0 :::4559 :::* LISTEN 3166/hfaxd
tcp 0 0 :::143 :::* LISTEN 2813/dovecot
tcp 0 0 :::80 :::* LISTEN 2916/httpd
tcp 0 0 :::50865 :::* LISTEN 2928/java
tcp 0 0 :::7443 :::* LISTEN 3301/java
tcp 0 0 :::5269 :::* LISTEN 3301/java
tcp 0 0 :::22 :::* LISTEN 2663/sshd
tcp 0 0 :::5080 :::* LISTEN 2928/java
tcp 0 0 :::443 :::* LISTEN 2916/httpd
tcp 0 0 :::7070 :::* LISTEN 3301/java
udp 0 0 0.0.0.0:640 0.0.0.0:* 2160/rpc.statd
udp 0 0 0.0.0.0:45699 0.0.0.0:* 3366/iaxmodem
udp 0 0 0.0.0.0:643 0.0.0.0:* 2160/rpc.statd
udp 0 0 0.0.0.0:49951 0.0.0.0:* 3229/avahi-daemon:
udp 0 0 0.0.0.0:2727 0.0.0.0:* 2972/asterisk
udp 0 0 0.0.0.0:4520 0.0.0.0:* 2972/asterisk
udp 0 0 0.0.0.0:5060 0.0.0.0:* 2972/asterisk
udp 0 0 0.0.0.0:4569 0.0.0.0:* 2972/asterisk
udp 0 0 0.0.0.0:5353 0.0.0.0:* 3229/avahi-daemon:
udp 0 0 0.0.0.0:111 0.0.0.0:* 2120/portmap
udp 0 0 0.0.0.0:631 0.0.0.0:* 2677/cupsd

I stop the and I run the fop2 with the command. /fop2_server -X 15

127.0.0.1 <- NewMessages: 1
127.0.0.1 <- OldMessages: 0
127.0.0.1 <- Server: 0

127.0.0.1 -> Action: MailboxStatus
127.0.0.1 -> Mailbox: 102@default

127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Mailbox Status
127.0.0.1 <- Mailbox: 102@default
127.0.0.1 <- Waiting: 0
127.0.0.1 <- Server: 0

127.0.0.1 -> Action: MailboxCount
127.0.0.1 -> Mailbox: 102@default

127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Mailbox Message Count
127.0.0.1 <- Mailbox: 102@default
127.0.0.1 <- NewMessages: 0
127.0.0.1 <- OldMessages: 0
127.0.0.1 <- Server: 0

127.0.0.1 -> Action: MailboxStatus
127.0.0.1 -> Mailbox: 101@default

127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Mailbox Status
127.0.0.1 <- Mailbox: 101@default
127.0.0.1 <- Waiting: 0
127.0.0.1 <- Server: 0

127.0.0.1 -> Action: MailboxCount
127.0.0.1 -> Mailbox: 101@default

127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Mailbox Message Count
127.0.0.1 <- Mailbox: 101@default
127.0.0.1 <- NewMessages: 0
127.0.0.1 <- OldMessages: 0
127.0.0.1 <- Server: 0

127.0.0.1 -> Action: Status

127.0.0.1 -> Action: QueueStatus

127.0.0.1 -> Action: SipPeers

127.0.0.1 -> Action: Agents

127.0.0.1 -> Action: Command
127.0.0.1 -> Command: meetme list 9000 concise
127.0.0.1 -> ActionID: meetme_9000

127.0.0.1 -> Action: Command
127.0.0.1 -> Command: database show fop2state
127.0.0.1 -> ActionID: fop2state

127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Channel status will follow
127.0.0.1 <- Server: 0

Response: Success
Message: Channel status will follow
Server: 0

127.0.0.1 <- Event: StatusComplete
127.0.0.1 <- Server: 0

127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Queue status will follow
127.0.0.1 <- Server: 0

Response: Success
Message: Queue status will follow
Server: 0

127.0.0.1 <- Event: QueueStatusComplete
127.0.0.1 <- Server: 0

127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Peer status list will follow
127.0.0.1 <- Server: 0

Response: Success
Message: Peer status list will follow
Server: 0

127.0.0.1 <- Event: PeerEntry
127.0.0.1 <- Channeltype: SIP
127.0.0.1 <- ObjectName: 108
127.0.0.1 <- ChanObjectType: peer
127.0.0.1 <- IPaddress: -none-
127.0.0.1 <- IPport: 0
127.0.0.1 <- Dynamic: yes
127.0.0.1 <- Natsupport: no
127.0.0.1 <- VideoSupport: yes
127.0.0.1 <- ACL: no
127.0.0.1 <- Status: UNKNOWN
127.0.0.1 <- RealtimeDevice: no
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: PeerEntry
127.0.0.1 <- Channeltype: SIP
127.0.0.1 <- ObjectName: 106
127.0.0.1 <- ChanObjectType: peer
127.0.0.1 <- IPaddress: -none-
127.0.0.1 <- IPport: 0
127.0.0.1 <- Dynamic: yes
127.0.0.1 <- Natsupport: no
127.0.0.1 <- VideoSupport: yes
127.0.0.1 <- ACL: no
127.0.0.1 <- Status: UNKNOWN
127.0.0.1 <- RealtimeDevice: no
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: PeerEntry
127.0.0.1 <- Channeltype: SIP
127.0.0.1 <- ObjectName: 105
127.0.0.1 <- ChanObjectType: peer
127.0.0.1 <- IPaddress: 192.168.10.15
127.0.0.1 <- IPport: 5060
127.0.0.1 <- Dynamic: yes
127.0.0.1 <- Natsupport: no
127.0.0.1 <- VideoSupport: yes
127.0.0.1 <- ACL: no
127.0.0.1 <- Status: OK (14 ms)
127.0.0.1 <- RealtimeDevice: no
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: PeerEntry
127.0.0.1 <- Channeltype: SIP
127.0.0.1 <- ObjectName: 104
127.0.0.1 <- ChanObjectType: peer
127.0.0.1 <- IPaddress: -none-
127.0.0.1 <- IPport: 0
127.0.0.1 <- Dynamic: yes
127.0.0.1 <- Natsupport: no
127.0.0.1 <- VideoSupport: yes
127.0.0.1 <- ACL: no
127.0.0.1 <- Status: UNKNOWN
127.0.0.1 <- RealtimeDevice: no
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: PeerEntry
127.0.0.1 <- Channeltype: SIP
127.0.0.1 <- ObjectName: 103
127.0.0.1 <- ChanObjectType: peer
127.0.0.1 <- IPaddress: 192.168.10.30
127.0.0.1 <- IPport: 5061
127.0.0.1 <- Dynamic: yes
127.0.0.1 <- Natsupport: no
127.0.0.1 <- VideoSupport: yes
127.0.0.1 <- ACL: no
127.0.0.1 <- Status: OK (7 ms)
127.0.0.1 <- RealtimeDevice: no
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: PeerEntry
127.0.0.1 <- Channeltype: SIP
127.0.0.1 <- ObjectName: 102
127.0.0.1 <- ChanObjectType: peer
127.0.0.1 <- IPaddress: 192.168.10.10
127.0.0.1 <- IPport: 5062
127.0.0.1 <- Dynamic: yes
127.0.0.1 <- Natsupport: no
127.0.0.1 <- VideoSupport: yes
127.0.0.1 <- ACL: no
127.0.0.1 <- Status: OK (30 ms)
127.0.0.1 <- RealtimeDevice: no
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: PeerEntry
127.0.0.1 <- Channeltype: SIP
127.0.0.1 <- ObjectName: 101
127.0.0.1 <- ChanObjectType: peer
127.0.0.1 <- IPaddress: 192.168.10.10
127.0.0.1 <- IPport: 5060
127.0.0.1 <- Dynamic: yes
127.0.0.1 <- Natsupport: no
127.0.0.1 <- VideoSupport: yes
127.0.0.1 <- ACL: no
127.0.0.1 <- Status: OK (29 ms)
127.0.0.1 <- RealtimeDevice: no
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: PeerlistComplete
127.0.0.1 <- ListItems: 7
127.0.0.1 <- Server: 0

127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Agents will follow
127.0.0.1 <- Server: 0

Response: Success
Message: Agents will follow
Server: 0

127.0.0.1 <- Event: AgentsComplete
127.0.0.1 <- Server: 0

127.0.0.1 <- Response: Follows
127.0.0.1 <- Privilege: Command
127.0.0.1 <- ActionID: meetme_9000
127.0.0.1 <- --END COMMAND--
127.0.0.1 <- Server: 0

127.0.0.1 <- Response: Follows
127.0.0.1 <- Privilege: Command
127.0.0.1 <- ActionID: fop2state
127.0.0.1 <- --END COMMAND--
127.0.0.1 <- Server: 0

127.0.0.1 -> Action: UserEvent
127.0.0.1 -> UserEvent: MEETME-REFRESH
127.0.0.1 -> Meetme:

127.0.0.1 <- Event: UserEvent
127.0.0.1 <- Privilege: user,all
127.0.0.1 <- UserEvent: MEETME-REFRESH
127.0.0.1 <- Action: UserEvent
127.0.0.1 <- Meetme:
127.0.0.1 <- Server: 0

asterisk cli

manager show connected
Username IP Address
ragm 127.0.0.1
ragm 127.0.0.1

ok look

./fop2_server -X 15
Flash Operator Panel 2 - No valid license found. Demo Mode

Can't listen to port 4445

telnet 192.168.10.3 4445
Trying 192.168.10.3...
Connected to vxserver (192.168.10.3).
Escape character is '^]'.

its ok connection

the screen of the fop2 load well, the problem is that when I put the extension to log in he never enters

Hi, I stop the fop2 the port 4445 this closed , I forget to comment that I use pure asterisk, I don't use any asterisk gui o other version de fop

only fop2

some idea where the error can be?, I install the fop2 from the gz

service fop2 stop
Shutting dows Flash Operator Panel 2: [ OK ]

netstat -an | grep 4445

Things to check:

1) flash player installed and working

yes , all is ok

2) fop2_server running and listening on port 4445

[b]# netstat -an | grep 4445
tcp 0 0 0.0.0.0:4445 0.0.0.0:* LISTEN

3) port 4445 not filtered or forwarded if needed

I don't have any firewall at the moment

Not that important but check anyways:

4) does buttons.cfg exists? What's inside?

buttons.cfg

[SIP/101]
type=extension
extension=101
context=netport
label=Ventas
mailbox=101@default
extenvoicemail=101@default

[SIP/102]
type=extension
extension=102
context=netport
label=Consultoria
mailbox=102@default
extenvoicemail=102@basicos

[SIP/103]
type=extension
extension=103
context=netport
label=Soporte
mailbox=103@default
extenvoicemail=103@basicos

[CONFERENCE/9000]
type=conference
label=Sala de Conferencia
server=1
extension=9000
context=basicos

Best regards,

regardss

Hi forum, I installs the version demo of the fop2 in centos 5, configure following the manual of the web and all ok until here, but when I log in with one of the extensions configured inside the fop2.cfg shows me this message :

he attempts it 10 times and later it leaves the message:

Could not connect to server

fop2.cfg

[general]
; AMI definitions
manager_host=localhost
manager_port=5038
manager_user=ragm
manager_secret=jej1qazfgt
;event_mask=call,agent

; Daemon definitios
;listen_port = 4447
;restrict_host = http://www.asternic.org
#web_dir = /var/www/html/operator/fop2
#web_dir = /var/www/html/fop2

; Global Config
language = en
poll_interval = 86400
poll_voicemail = 1
monitor_ipaddress = 0

;master_key = 5678

; USER LIST
user=101:liwewwsq:all
user=102:21qalux:all
user=103:linsddsdaxcx:all
;user=623:1234all
buttonfile=buttons.cfg

I have something bad inside the configuration ?

regardss