When a call is made from an extension the only CallerID information shown in FOP2 is the outgoing trunk ID, eg <2600> - I would have expected it to show the Called Number. The called number does show on the Trunk details.

Using;
FreePBX 14.01.24
Asterisk 13.18.5
FOP2 2.31.16

I'm not sure if this is even meant to work as I'd like it to, or whether I need to change a configuration somewhere.....

When a call is transferred to another extension using attended xfer, fop2 does not update the display (it's fine with blind xfers).

For example if A transfers a call to B, fop correctly clears-down the status on A, but B is shown as still talking to A and not the caller that was transferred to B

This is with FOP2.20 (and tried 2.21 Beta), SIP channels for the phones, callevents is enabled in the sip settings.

We're using P-Asserted headers and the phones correctly update when a call is transferred.

Any ideas?
Cheers,
Andy.

Many thanks - I'll give that a go.

I'll be buying a license when the box goes live so this is just a temporary workaround.

Thanks again.

Hi,

Yes I realised about the 15 limit just after I posted but couldn't do anything until the post was approved.

What caught me out was that "15 extensions" also includes trunks and parking lots.

Talking of parking lots, I don't have any defined at all but a default of 700 always appears, reducing the usable count to 14. Is there a way of making fop2 ignore it?

Cheers.

I have 2 trunks set up - one ISDN30 E1 Dahdi and one IAX2 inter-Asterisk trunk. The ISDN30 Dahdi trunk shows fine, but I cannot get the IAX2 trunk to show.

Under FOP2 buttons in FreePBX both trunks are there. For the IAX2 trunk autoconfig-buttons-freepbx.sh shows;

[IAX2/bardsey]
type=trunk
label=IAX2/bardsey
queuecontext=from-queue
privacy=none

The Trunk config is;

Trunk name : bardsey

PEER details

username=not-telling-you-IAXuser
type=peer
trunk=yes
secret=not-telling-you
requirecalltoken=no
qualify=yes
host=pbx.mypbxdomain.com
disallow=all
allow=g722

USER context : not-telling-IAXuser

USER details

type=user
secret=not-telling-IAXpassword
disallow=all
context=from-trunk
allow=g722

This is with FreePBX 2.9.0.5 and Asterisk 1.8.4.1

FreePBX 2.9.0.5 + Asterisk 1.8.4.1

The supplied extensions_override_freepbx.conf needs changing slightly for the latest version of Asterisk to prevent breaking DND etc

At present it calls DEVSTATE, this needs changing to DEVICE_STATE throughout the file.

Andy.