Hi,

I'm interested to know called extension number (or the connected user which should be same) in checkdir.php too. I think it's a good feature to can do different things depending of the connected user.

Best regards,

Nicolas.

Hi Nicolás,

If you use centos 32 bits, you can download the latest beta from http://www.fop2.com/downloads/fop2.tgz

Is it possible to have this new features on etch/lenny beta releases ? I can use groups in buttons.conf for display extensions in many boxes but I can't use groups in fop2.cfg for rights and privacy function. If you update etch beta release, please make attention to perl problems because I can't install lenny beta release anymore.

Best regards,

Nicolas.

Hi Nicolás.

Thank you for your responsiveness. It works well, very good job. :)

Best regards,

Nicolas.

I have updated the lenny32 beta package. Please try again and let me know.

Thanks, it works, now. On the other side, attendant transfers seems to work upside :

01- I connect myself on FOP2 as 400
02- 401 calls 400
03- 400 answers
04- On FOP2, I click on 304 extension button and on the transfer button
05- 304 rings
06- 400 has music on hold
07- 401 waits for an answer
08- 304 answers
09- 401 speaks to 304
10- 401 hangup
11- 400 speaks to 304

From step 6 to 11, I think 400 should replace 401 and vice versa, no ? Or I make bad handling ?

Best regards,

Nicolas.

Hello !

For testing attendant transfers with 1.4 you have to use fop2 beta and add to fop2.cfg:

supervised_transfer = 1

The beta can be downloaded from:

http://www.fop2.com/downloads/fop2.tgz (centos 5, 32 bits)

or

fop2-beta-centos4-32.tgz
fop2-beta-centos5-64.tgz
fop2-beta-etch32.tgz
fop2-beta-etch64.tgz
fop2-beta-lenny32.tgz
fop2-beta-lenny64.tgz

OK, thanks but it seems there is a problem with fop2-beta-lenny32.tgz : the fop2_server binary is in 64 bits.

# /etc/init.d/fop2 start
Starting Flash Operator Panel 2: fop2start-stop-daemon: Unable to start /usr/local/fop2/fop2_server: Exec format error (Exec format error)
# file /usr/local/fop2/fop2_server 
/usr/local/fop2/fop2_server: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.8, stripped

Do you have 32 bits version ?

About the number of channels for a trunk, do a "show channels" instead of a "sip show channels" and look for channel names. FOP2 matches on channel names.

Thanks, I understand now. Name between brackets must be same than username in sip.conf. Also, I can have one button for outbound calls and one for inbound calls. Thank you. :)

PS: Thanks for the translation file!

No problem. :) You should add the next line in your lang_fr_FR.js beta file :

lang['parkingslots']       = 'Places de parking';

Best regards,

Nicolas.

- Attended transfer with Asterisk 1.4 (it seems I must patch Asterisk for this so I will test).

Yes, you must patch Asterisk.I have made an asterisk.rpm for Elastix 1.5 (not 1.6). I can provide you with that file (use at your own risk) if you want to test.

I patched my Asterisk but attended transfer still not work. FOP2 still do blind transfer. The patch seems to be applicated :

> show manager command Atxfer
Action: Atxfer
Synopsis: Attended transfer
Privilege: call,all
Description: do attended transfer.
Variables: (Names marked with * are required)
*Channel: transferer Channel
*Exten: Extension to transfer to
Context: Context to transfer to
ActionID: Optional Action id for message matching.

I have enough access to the manager. Do I have a configuration problem or a parameter missing ? Finally, I would have your RPM file for test if you can.

Thanks.

Nicolas.

Hi,

- For trunks, I see used lines only for outgoing calls, not incoming. Is it normal ?

Is it normal if you have different pear names for inbound calls. In many configurations I have seen that incoming calls are not matched as the same pear as outbound calls, (and are many times received as anonymous calls). If you fix your peer definition in Asterisk you will see both inbound and outbound calls.

This is an extract of my sip.conf :

register => aaaaa:[email protected]
[prov_1]
type=friend
host=x.x.x.x
secret=bbbbb
username=aaaaa
context=sda_incoming
insecure=very
disallow=all
qualify=yes
allow=alaw
allow=gsm

And here this is sip channels when two calls are in progress. The first two lines show an inbound call. The other lines show an outbound call.

1000809001> sip show channels
Peer User/ANR Call ID Seq (Tx/Rx) Format Hold Last Message
y.y.y.y 401 ----------- 00102/00000 0x8 (alaw) No Tx: ACK
x.x.x.x aaaaa ----------- 00101/00102 0x8 (alaw) No Rx: ACK
x.x.x.x <ext_num> ----------- 00103/00000 0x8 (alaw) No Tx: ACK
z.z.z.z 400 ----------- 00101/00002 0x8 (alaw) No Rx: ACK

In FOP2, I see only "1 lines used" for my trunk prov_1. I don't understand what's the problem ?

Best regards,

Nicolas.

Hi,

There is a bug for debian-based distributions : the init script is not copied.

In Makefile, you should replace :

if [ -f /etc/debian-version ]; then \

By :

if [ -f /etc/debian_version ]; then \

Best regards,

Nicolas.

Hi,

If it doesn't work for you, I solved the problem on Debian Lenny 5.0.2 i386 by installing this CPAN module manually :
http://search.cpan.org/CPAN/authors/id/ ... 020.tar.gz
Installation instructions are in the tarball.

Best regards,

Nicolas.

Hi,

I had almost same error with a just installed and up to date Lenny 5.0.2 i386 :

Compress::Raw::Zlib object version 2.008 does not match bootstrap parameter 2.020 at /usr/local/lib/perl/5.10.0/Compress/Raw/Zlib.pm line 97.
Compilation failed in require at /usr/local/share/perl/5.10.0/Archive/Zip.pm line 12.
BEGIN failed--compilation aborted at /usr/local/share/perl/5.10.0/Archive/Zip.pm line 12.
Compilation failed in require at -e line 359.

I resolved the problem by installing 2.020 version of Compress::Raw::Zlib manually. I think the problem is still strange on a clean install.

Best regards,

Nicolas.