Hi again, I learned in irc, that - when you run bash as /bin/sh it kicks into a different "mode" internally which does not support the <( command ) syntax

so instead of
sh scriptname.sh

I did
./scriptname, and voilà it worked :)

Hi and thanks for your quick reply. I will try that out, and play around with the trial version. :D

hm, that would be
done < <( mysql -NB -u $DBUSER -p$DBPASS -h $DBHOST $DBNAME -e "SHOW tables FROM \`$DBNAME\` LIKE 'fop2users'" )
I tried to delete this and replace with FOP2PLUGIN=1 but that gives me:

sh autoconfig-buttons-freepbx.sh
autoconfig-buttons-freepbx.sh: line 38: syntax error near unexpected token `<'
autoconfig-buttons-freepbx.sh: line 38: `done < <( mysql -NB -u $DBUSER -p$DBPASS -h $DBHOST $DBNAME -e "SHOW tables FROM \`$DBNAME\` LIKE 'fop2users'" )'

but wait a second. I tried the following:

instead of https://sipserver/fop2 I tried with http://sipserver/fop2 and voilà the login was ok :D

I did not think about it, cause I only use https:// for my freepbx website...

Is it possible to run fop2 page on port 443?

My Gentoo has standard shell: app-shells/bash-4.2_p45 installed:

emerge --search:

app-shells/bash
Latest version available: 4.2_p45
Latest version installed: 4.2_p45
Size of files: 6,952 kB
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html
Description: The standard GNU Bourne again shell
License: GPL-3

And yes, I do have freepbx-2.11.0rc1 installed from tarball. I also come from installing the adminmodule via webinterface, and that worked without problem. There is no manual configuration left, I just had tried to see, if I could login at least with manual config, but I was not able to login with manual configuration eather, and that's what I cannot understand.. :(

As for the error with the script(s): I dont understand which line has to be deleted, and / or if there is a manual way of doing the job that this script tries to do. Following again the errors, when trying to execute the scripts manually:

cd /usr/local/fop2
sh autoconfig-users-freepbx.sh
autoconfig-users-freepbx.sh: line 32: syntax error near unexpected token `<'
autoconfig-users-freepbx.sh: line 32: `done < <( mysql -NB -u $DBUSER -p$DBPASS -h $DBHOST $DBNAME -e "SHOW tables FROM \`$DBNAME\` LIKE 'fop2users'" )'

and

sh autoconfig-buttons-freepbx.sh
autoconfig-buttons-freepbx.sh: line 38: syntax error near unexpected token `<'
autoconfig-buttons-freepbx.sh: line 38: `done < <( mysql -NB -u $DBUSER -p$DBPASS -h $DBHOST $DBNAME -e "SHOW tables FROM \`$DBNAME\` LIKE 'fop2users'" )'

Thanks again for trying to help. Its so annoying because I think, I am only one step away of having a look and test your promising software :)

In FOP2 Admin Module I can see the extensions, which have voicemail enabled and I tried to modify the secret of one user, and then try to login with it, but it does not work :oops:

Hi Nicolás,

I am making some progress here :)

I now can start the fop_server successfully - having installed the 2.27 version - and as you said, without needing to create a symlink for libcrypto libraries. netstat -nl now shows listening on port 4445 :)

Unfortunatelly I still cannot login in successfully. Not with my extension, which has enabled its voicemail, and not with a user, defined in fop2.cfg. (I tried also with uncommented button.cfg, and also with deactivated addons on my browser, even stopped iptables service to be sure, it is not a problem with the firewall)

So I decided to execute the shell script autoconfig-users-freepbx.sh manually to see what happens, and got this error:

sh autoconfig-users-freepbx.sh
autoconfig-users-freepbx.sh: line 32: syntax error near unexpected token `<'
autoconfig-users-freepbx.sh: line 32: `done < <( mysql -NB -u $DBUSER -p$DBPASS -h $DBHOST $DBNAME -e "SHOW tables FROM \`$DBNAME\` LIKE 'fop2users'" )'

repetition of my install steps:

• wget file to /usr/src and untarred it
• cd to created fop2 directory and executed make install
• modified fop2.cfg and set manager_user and manager_secret
• created /usr/local/fop2/tmp
• executed export PAR_GLOBAL_TMPDIR=/usr/local/fop2/tmp/
• cd /usr/local/fop2 and executed ./fop_server --test

-> Flash Operator Panel 2 - License file fop2.lic not found.
Running in Demo Mode
Connection to manager OK!

So I started server as daemon:
- ./fop2_server -d

Then I tried to login with an existing extension, which has a voicemail account configured, and this did not work, then tried with user 622 and pass 1234 which I uncommented in fop2.cfg but this did not let me login eather.

I get attemting to connect to server 1....2.....3.....4 and so on.

Thanks in advance for your help. :)

last thing, I tried is:
fop_server -X 3 and there it seems to be able to connect db as it shows:

127.0.0.1 -> AuthType: md5
127.0.0.1 -> Action: Challenge
127.0.0.1 -> ActionID: 1

127.0.0.1 <- Response: Success
127.0.0.1 <- ActionID: 1
127.0.0.1 <- Challenge: xxxxx

127.0.0.1 -> AuthType: md5
127.0.0.1 -> Events: on
127.0.0.1 -> Username: xxxx
127.0.0.1 -> Action: login
127.0.0.1 -> Key: xxxx
127.0.0.1 -> ActionID: 2

127.0.0.1 <- Response: Success
127.0.0.1 <- ActionID: 2
127.0.0.1 <- Message: Authentication accepted
127.0.0.1 -> Mailbox: xxxx@novm
127.0.0.1 -> Action: MailboxStatus
127.0.0.1 -> ActionID: 3

127.0.0.1 -> Action: Status

127.0.0.1 -> Action: QueueStatus

127.0.0.1 -> Action: Agent

127.0.0.1 -> Action: SipPeers

127.0.0.1 -> Action: IaxPeers

127.0.0.1 -> Action: ParkedCalls

127.0.0.1 -> Command: database show AMPUSER
127.0.0.1 -> Action: Command
127.0.0.1 -> ActionID: 4
127.0.0.1 -> Command: database show DEVICE
127.0.0.1 -> Action: Command
127.0.0.1 -> ActionID: 5

127.0.0.1 -> Command: meetme list xxxx concise
127.0.0.1 -> Action: Command
127.0.0.1 -> ActionID: 6

127.0.0.1 -> Conference: xxxx
127.0.0.1 -> Action: ConfbridgeList
127.0.0.1 -> ActionID: 7

127.0.0.1 -> Command: database show fop2notes
127.0.0.1 -> Action: Command
127.0.0.1 -> ActionID: 8

127.0.0.1 -> Command: database show fop2state
127.0.0.1 -> Action: Command
127.0.0.1 -> ActionID: 9

127.0.0.1 -> Action: CoreSettings
127.0.0.1 -> ActionID: 10

127.0.0.1 <- Event: FullyBooted
127.0.0.1 <- Privilege: system,all
127.0.0.1 <- Status: Fully Booted

127.0.0.1 <- Response: Success
127.0.0.1 <- ActionID: 3
127.0.0.1 <- Message: Mailbox Status
127.0.0.1 <- Mailbox: xxxx@novm
127.0.0.1 <- Waiting: 0

127.0.0.1 -> Mailbox: xxxx@novm
127.0.0.1 -> Action: MailboxCount
127.0.0.1 -> ActionID: 11

127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Channel status will follow

127.0.0.1 <- Event: StatusComplete
127.0.0.1 <- Items: 0

127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Queue status will follow

127.0.0.1 <- Event: QueueParams
127.0.0.1 <- Queue: default
127.0.0.1 <- Max: 0
127.0.0.1 <- Strategy: ringall
127.0.0.1 <- Calls: 0
127.0.0.1 <- Holdtime: 0
127.0.0.1 <- TalkTime: 0
127.0.0.1 <- Completed: 0
127.0.0.1 <- Abandoned: 0
127.0.0.1 <- ServiceLevel: 0
127.0.0.1 <- ServicelevelPerf: 0.0
127.0.0.1 <- Weight: 0

127.0.0.1 <- Event: QueueStatusComplete

127.0.0.1 <- Response: Error
127.0.0.1 <- Message: Invalid/unknown command: Agent. Use Action: List commands to show available commands.

127.0.0.1 <- Response: Success
127.0.0.1 <- EventList: start
127.0.0.1 <- Message: Peer status list will follow

127.0.0.1 <- Event: PeerEntry
127.0.0.1 <- Channeltype: SIP
127.0.0.1 <- ObjectName: xxxx
127.0.0.1 <- ChanObjectType: peer
127.0.0.1 <- IPaddress: -none-
127.0.0.1 <- IPport: 0
127.0.0.1 <- Dynamic: yes
127.0.0.1 <- AutoForcerport: no
127.0.0.1 <- Forcerport: yes
127.0.0.1 <- AutoComedia: no
127.0.0.1 <- Comedia: yes
127.0.0.1 <- VideoSupport: yes
127.0.0.1 <- TextSupport: no
127.0.0.1 <- ACL: yes
127.0.0.1 <- Status: UNKNOWN
127.0.0.1 <- RealtimeDevice: no
127.0.0.1 <- Description:

127.0.0.1 <- Event: PeerEntry
127.0.0.1 <- Channeltype: SIP
127.0.0.1 <- ObjectName: xxxx
127.0.0.1 <- ChanObjectType: peer
127.0.0.1 <- IPaddress: -none-
127.0.0.1 <- IPport: 0
127.0.0.1 <- Dynamic: yes
127.0.0.1 <- AutoForcerport: no
127.0.0.1 <- Forcerport: yes
127.0.0.1 <- AutoComedia: no
127.0.0.1 <- Comedia: yes
127.0.0.1 <- VideoSupport: yes
127.0.0.1 <- TextSupport: no
127.0.0.1 <- ACL: yes
127.0.0.1 <- Status: UNKNOWN
127.0.0.1 <- RealtimeDevice: no
127.0.0.1 <- Description:

and so on for all my peers, followed by the siptrunk connections:

127.0.0.1 <- Event: PeerEntry
127.0.0.1 <- Channeltype: SIP
127.0.0.1 <- ObjectName: <tel.number>
127.0.0.1 <- ChanObjectType: peer
127.0.0.1 <- IPaddress: ip.add.re.ss
127.0.0.1 <- IPport: port
127.0.0.1 <- Dynamic: no
127.0.0.1 <- AutoForcerport: no
127.0.0.1 <- Forcerport: yes
127.0.0.1 <- AutoComedia: no
127.0.0.1 <- Comedia: yes
127.0.0.1 <- VideoSupport: yes
127.0.0.1 <- TextSupport: no
127.0.0.1 <- ACL: no
127.0.0.1 <- Status: Unmonitored
127.0.0.1 <- RealtimeDevice: no
127.0.0.1 <- Description:

....

127.0.0.1 <- Event: PeerEntry
127.0.0.1 <- Channeltype: SIP
127.0.0.1 <- ObjectName: context for outgoing calls
127.0.0.1 <- ChanObjectType: peer
127.0.0.1 <- IPaddress: x.y.z.w
127.0.0.1 <- IPport: port
127.0.0.1 <- Dynamic: no
127.0.0.1 <- AutoForcerport: no
127.0.0.1 <- Forcerport: no
127.0.0.1 <- AutoComedia: no
127.0.0.1 <- Comedia: no
127.0.0.1 <- VideoSupport: yes
127.0.0.1 <- TextSupport: no
127.0.0.1 <- ACL: no
127.0.0.1 <- Status: OK (12 ms)
127.0.0.1 <- RealtimeDevice: no
127.0.0.1 <- Description:

127.0.0.1 <- Event: PeerlistComplete
127.0.0.1 <- EventList: Complete
127.0.0.1 <- ListItems: 46

127.0.0.1 <- Response: Success
127.0.0.1 <- EventList: start
127.0.0.1 <- Message: Peer status list will follow

127.0.0.1 <- Event: PeerlistComplete
127.0.0.1 <- EventList: Complete
127.0.0.1 <- ListItems: 0

127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Parked calls will follow

127.0.0.1 <- Event: ParkedCallsComplete
127.0.0.1 <- Total: 0

127.0.0.1 <- Response: Follows
127.0.0.1 <- Privilege: Command
127.0.0.1 <- ActionID: 4
127.0.0.1 <- /AMPUSER//queues/qnostate
/AMPUSER/xxxx/answermode : disabled
/AMPUSER/xxxx/ccss/cc_agent_policy : generic
/AMPUSER/xxxx/ccss/cc_offer_timer : 30
/AMPUSER/xxxx/ccss/last_number : xxxx
/AMPUSER/xxxx/cfringtimer : 0
/AMPUSER/xxxx/cidnum : xxxx
/AMPUSER/xxxx/concurrency_limit : 0
/AMPUSER/xxxx/device : xxxx
/AMPUSER/xxxx/followme/changecid : default
/AMPUSER/xxxx/followme/ddial : DIRECT
/AMPUSER/xxxx/followme/fixedcid :
/AMPUSER/xxxx/followme/grpconf : DISABLED
/AMPUSER/xxxx/followme/grplist : tel_number#
/AMPUSER/xxxx/followme/grptime : 20
/AMPUSER/xxxx/followme/prering : 0
/AMPUSER/xxxx/language :
/AMPUSER/xxxx/noanswer :
/AMPUSER/xxxx/outboundcid :
/AMPUSER/xxxx/password : secret
/AMPUSER/xxxx/queues/qnostate : usestate
/AMPUSER/xxxx/recording :
/AMPUSER/xxxx/recording/in/external : dontcare
/AMPUSER/xxxx/recording/in/internal : dontcare
/AMPUSER/xxxx/recording/ondemand : disabled
/AMPUSER/xxxx/recording/out/external : dontcare
/AMPUSER/xxxx/recording/out/internal : dontcare
/AMPUSER/xxxx/recording/priority : 10
/AMPUSER/xxxx/ringtimer : 0
/AMPUSER/xxxx/voicemail : novm

and so on for my other extensions

127.0.0.1 -> Action: DBGet
127.0.0.1 -> Family: DEVICE/xxxx
127.0.0.1 -> Key: dial
127.0.0.1 -> ActionID: getDEVICE-xxxx

for all extensions again..
127.0.0.1 <- Response: Follows
127.0.0.1 <- Privilege: Command
127.0.0.1 <- ActionID: 5
127.0.0.1 <- /DEVICE/xxxx/default_user : xxxx
/DEVICE/xxxx/dial : SIP/xxxx
/DEVICE/xxxx/type : fixed
/DEVICE/xxxx/user : xxxx
...
127.0.0.1 <- Response: Follows
127.0.0.1 <- Privilege: Command
C127.0.0.1 <- ActionID: 6
127.0.0.1 <- No such command 'meetme list xxxx concise' (type 'core show help meetme list' for other possible commands)
--END COMMAND--

127.0.0.1 <- Response: Error
127.0.0.1 <- ActionID: 7
127.0.0.1 <- Message: No active conferences.

127.0.0.1 <- Response: Follows
127.0.0.1 <- Privilege: Command
127.0.0.1 <- ActionID: 8
127.0.0.1 <- 0 results found.
--END COMMAND--

127.0.0.1 <- Response: Follows
127.0.0.1 <- Privilege: Command
127.0.0.1 <- ActionID: 9
127.0.0.1 <- 0 results found.
--END COMMAND--

127.0.0.1 <- Response: Success
127.0.0.1 <- ActionID: 10
127.0.0.1 <- AMIversion: 1.3
127.0.0.1 <- AsteriskVersion: 11.2.2
127.0.0.1 <- SystemName:
127.0.0.1 <- CoreMaxCalls: 0
127.0.0.1 <- CoreMaxLoadAvg: 0.000000
127.0.0.1 <- CoreRunUser:
127.0.0.1 <- CoreRunGroup:
127.0.0.1 <- CoreMaxFilehandles: 0
127.0.0.1 <- CoreRealTimeEnabled: No
127.0.0.1 <- CoreCDRenabled: Yes
127.0.0.1 <- CoreHTTPenabled: No

127.0.0.1 <- Response: Success
127.0.0.1 <- ActionID: 11
127.0.0.1 <- Message: Mailbox Message Count
127.0.0.1 <- Mailbox: xxxx@novm
127.0.0.1 <- UrgMessages: 0
127.0.0.1 <- NewMessages: 0
127.0.0.1 <- OldMessages: 0

127.0.0.1 -> Mailbox: xxxx@novm
127.0.0.1 -> Action: MailboxStatus
127.0.0.1 -> ActionID: 12

127.0.0.1 <- Response: Success
127.0.0.1 <- ActionID: getDEVICE-xxxx
127.0.0.1 <- Message: Result will follow

127.0.0.1 <- Event: DBGetResponse
127.0.0.1 <- Family: DEVICE/xxxx
127.0.0.1 <- Key: dial
127.0.0.1 <- Val: SIP/xxxx
127.0.0.1 <- ActionID: getDEVICE-xxxx

127.0.0.1 <- Event: DBGetComplete
127.0.0.1 <- ActionID: getDEVICE-xxxx
.....
127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Channel status will follow

127.0.0.1 <- Event: StatusComplete
127.0.0.1 <- Items: 0

127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Queue status will follow

127.0.0.1 <- Event: QueueParams
127.0.0.1 <- Queue: default
127.0.0.1 <- Max: 0
127.0.0.1 <- Strategy: ringall
127.0.0.1 <- Calls: 0
127.0.0.1 <- Holdtime: 0
127.0.0.1 <- TalkTime: 0
127.0.0.1 <- Completed: 0
127.0.0.1 <- Abandoned: 0
127.0.0.1 <- ServiceLevel: 0
127.0.0.1 <- ServicelevelPerf: 0.0
127.0.0.1 <- Weight: 0

127.0.0.1 <- Event: QueueStatusComplete

127.0.0.1 <- Response: Success
127.0.0.1 <- ActionID: 13
127.0.0.1 <- Message: Mailbox Message Count
127.0.0.1 <- Mailbox: xxxx@novm
127.0.0.1 <- UrgMessages: 0
127.0.0.1 <- NewMessages: 0
127.0.0.1 <- OldMessages: 0
....
127.0.0.1 -> Action: Logoff

Removing /var/www/html/fop2-variables.txt...

Removing ./fop2-variablesGENERAL.txt...

Disconnecting from settings DB

Exiting...

Thanks for pointing that out. Now I tried with:
export PAR_GLOBAL_TMPDIR=/usr/local/fop2/tmp/

and here's what I get now starting fop2_server:

Can't load '/usr/local/fop2/tmp/par-root/cache-4b3df8b00ea32d78fbcfc645d56579285258145c/aaf44dba.so' for module Filter::Crypto::Decrypt: libcrypto.so.6: cannot open shared object file: No such file or directory at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/DynaLoader.pm line 230.
> at /usr/lib/perl5/site_perl/5.8.8/PAR/Heavy.pm line 128
> BEGIN failed--compilation aborted at /usr/local/fop2/tmp/par-root/cache-4b3df8b00ea32d78fbcfc645d56579285258145c/inc/lib/Filter/Crypto/Decrypt.pm line 37.
> Compilation failed in require at script/fop2_server.pl line 1.
> BEGIN failed--compilation aborted at script/fop2_server.pl line 1.

I checked and DynaLoader.pm is located here on my system:
/usr/lib/perl5/5.12.4/i686-linux/DynaLoader.pm

I have used the centos5 i386 tarball for 32-bit systems, should I have used the one for debian 32-bit systems?

I have installed dev-lang/perl-5.12.4-r1, which is the actual stable version in gentoo. Is there a way/fix to use fop2 with this perl version?

Hi all,

I tried toinstall fop2 on a gentoo box with asterisk 11.2.2 and freepbx 2.11.0rc1 on it, following the tarball install instructions, so I wget the source, untarred it and did a make install, which copied the files to its locations.

Now Webpage is there and I get to the loginprompt, but I cannot seem to start the fop2 server itself, and thus not login, nor does the box listen on 4445 port. When in the console I go to location /usr/local/fop2 and execute ./fop2_server --test it just does nothing, no error message, it just gives me a new prompt.

Can you help me with this please?