Hi.
I've just updated to the last 2.30 release without any issue.
I can access to the FOP Manager and then define user, group, etc..., but I can't login too to the FOP 2 dashboard:

[attachment:5615504cbf592]

On the screen is showed up : "One moment please ..." and I can't see never the dashboard.
I've attempted to do this even with firefox and even with Chrome.
Any idea?
Thanks in advance

Is there any (simple) way to show only a selected number of extensions on the FOP2 dashboard?

Is there any (simple) way to show only a selected number of extensions on the FOP2 dashboard?

The freepbx distro includes fop2 as an rpm, it is easier to go that way.

Sorry.
Where may I found rpm version in freepbx 2.10 and how can I install it?
Thanks in advance.

I use an SSH Tunnel and Firefox properly configured to manage my TrixBox server from a remote location via Internet.
All works fine, I can manage all features of TB by means freepbx dashboard.
But when I try to use FOP2 from the same remote location and via SSH tuneel I can't login to the switchboard: I put in the username and password but nothing happens and I can't login to the switchboard.
Any idea?

On my 2.8.0.3 TB server is installed a Sangoma A200 card with two FXO each connected to a differente PSTN line.
In my FOP2 panel only one DAHADI channel is showed even if all the two channels works well in my phone system.
This is an extraxt of autoconfig-buttons-freepbx.sh :

DAHDI=`asterisk -rx "dahdi show channels" | grep -v from-internal | grep -v pseudo | grep -v Language | awk '{print $1}' | head -n 1`
if [ "X${DAHDI}" != "X" ]; then
echo
echo "[DAHDI/$DAHDI]"
echo "type=trunk"
echo "label=Telecom Italia 1"
asterisk -rx "dahdi show channels" | grep -v from-internal | grep -v pseudo | grep -v Language | awk '{print $1}' | tail -n +2 | while read LINEA
do
echo "channel=DAHDI/$LINEA"
done
fi
Is needed any different configuration in the autoconfig-buttons-freepbx.sh to show even the second dahdi channel?
Thanks in advance.
Ing. Cosimo MERCURO
Mercuro for Business

OK! Works fine form too.
Thanks
Cosimo

The problem is:
Zap channel works always fine!
When a call is placed on Zap channel the relative FOP2 button is showed "red" and with "one line in use" and "ZAP/4".
This only when I've modified the autoconfig-buttons-freepbx.sh " based on the post [url:15c630i1]http://www.fop2.com/forum/View Post 24[/url:15c630i1]on this forum.
The problem is that when, for any reason, I must reboot asterisk/Trixbox server when reboot is finished even if the Zap trunk continue to works correctly (I can place a and receive calls on ZAP trunk) the FOP2 Button don't show anything and remain ever green.
In order that the ZAP FOP2 button to begin again to works correctly (becoming red and showing all information relative to call) I must:

1. connect via SSH to asterisk server
2. do a: "Service fop2 restart" command

At this point all works fine too.
I hope this clear my issue.

Thanks in advance.
Cosimo

I'm trying FOP2 on a Trixbox 2.6 server whit one ZAP trunks and some SIP trunks.
I've modified autoconfig-buttons-freepbx.sh "ZAP extensions" post on this forum to display correctly ZAP trunks (instead of default DAHDI trunk) and all seems to works.
But, when I reboot the trixbox server (for maintenance purpose) I've noted that since the ZAP trunks displayed on FOP2 server dashboard works correctly (becomes red when a call is in progress) I must manually restart FOP2 server by means : "Service fop2 restart".
In other works if I don't manually restart FOP2 server the Zaptel channel don't works properly!
And this even if other trunks (SIP trunks) works correctly without need to manually restart.
Is there a way to fix this issue ?

Thanks in advance.
Ing. Cosimo MERCURO
Mercuro for Business