Greetings!

Is there a way to hide the status of one extension but keep the button on the FOP2 panel? IE: not show orange when one extension is making a call or display the called number.

Thanks!

Likely, it's something not on FOP2's end but when I check a message and, say, delete it, FOP2 still shows that there is a new message.

Any ideas?

Thanks again and fantastic job on FOP2!

I was reading the user manual and it mentioned that if I clicked a button, it should turn red. It is turning blue. I saw a different post where you offered a solution to add "all" permissions in /etc/asterisk/manager.conf file , both in read/write lines. I did that. I even rebooted the system but no luck.

Any hints? :)

Greetings,

I see in most of the videos and instructions on how to use the FOP2 WebGUI, people are able to click the button beside an extension to get a dropdown box of options (i believe it's called the Action submenu).

All that I get is a line. Any ideas? Please see my screenshot where I clicked beside 10 Kim-Man:

http://i419.photobucket.com/albums/pp280/Shandleyman/PBX/FOP2-002.jpg

How exiting!

I set it up as shown below.

http://i419.photobucket.com/albums/pp280/Shandleyman/PBX/FOP2-001.jpg

Thanks again! Works like a charm!

I'm new but learning a lot. Thanks

Oh sorry. Yes I ran /usr/local/fop2/fop2_server --test and got a result of "Connection to manager OK!"

When I ran /usr/local/fop2/autoconfig-buttons-freepbx.sh, I get:
[ZAP/1]
type=extension
extension=10
label=Kim-Man
mailbox=10@default
context=from-internal
queuecontext=from-internal
extenvoicemail=*10@default
rtmp=0
queuechannel=Local/10@from-internal/n|Penalty=0|MemberName=Kim-Man|StateInterface=ZAP/1
customastdb=CF/10

[ZAP/2]
type=extension
extension=20
label=Darrell-Downstairs
mailbox=20@default
context=from-internal
queuecontext=from-internal
extenvoicemail=*20@default
rtmp=0
queuechannel=Local/20@from-internal/n|Penalty=0|MemberName=Darrell-Downstairs|StateInterface=ZAP/2
customastdb=CF/20

[VIRTUAL/21]
type=extension
extension=21
label=Fred-Cell
context=from-internal
queuecontext=from-internal
rtmp=0
queuechannel=Local/21@from-internal/n|Penalty=0|MemberName=Fred-Cell
customastdb=CF/21

[ZAP/3]
type=extension
extension=30
label=Jim-Downstairs
mailbox=30@default
context=from-internal
queuecontext=from-internal
extenvoicemail=*30@default
rtmp=0
queuechannel=Local/30@from-internal/n|Penalty=0|MemberName=Jim-Downstairs|StateInterface=ZAP/3
customastdb=CF/30

[VIRTUAL/31]
type=extension
extension=31
label=Jim-Cell
context=from-internal
queuecontext=from-internal
rtmp=0
queuechannel=Local/31@from-internal/n|Penalty=0|MemberName=Jim-Cell
customastdb=CF/31

[ZAP/4]
type=extension
extension=40
label=Dave-Shop-1
mailbox=40@default
context=from-internal
queuecontext=from-internal
extenvoicemail=*40@default
rtmp=0
queuechannel=Local/40@from-internal/n|Penalty=0|MemberName=Dave-Shop-1|StateInterface=ZAP/4
customastdb=CF/40

[VIRTUAL/41]
type=extension
extension=41
label=Dave-Cell
context=from-internal
queuecontext=from-internal
rtmp=0
queuechannel=Local/41@from-internal/n|Penalty=0|MemberName=Dave-Cell
customastdb=CF/41

[ZAP/5]
type=extension
extension=50
label=Ming
mailbox=50@default
context=from-internal
queuecontext=from-internal
extenvoicemail=*50@default
rtmp=0
queuechannel=Local/50@from-internal/n|Penalty=0|MemberName=Ming|StateInterface=ZAP/5
customastdb=CF/50

[VIRTUAL/51]
type=extension
extension=51
label=Ming-Cell
context=from-internal
queuecontext=from-internal
rtmp=0
queuechannel=Local/51@from-internal/n|Penalty=0|MemberName=Ming-Cell
customastdb=CF/51

[VIRTUAL/55]
type=extension
extension=55
label=Scott-Cell
context=from-internal
queuecontext=from-internal
rtmp=0
queuechannel=Local/55@from-internal/n|Penalty=0|MemberName=Scott-Cell
customastdb=CF/55

[ZAP/8]
type=extension
extension=80
label=Shawn-Upstairs
mailbox=80@default
context=from-internal
queuecontext=from-internal
extenvoicemail=*80@default
rtmp=0
queuechannel=Local/80@from-internal/n|Penalty=0|MemberName=Shawn-Upstairs|StateInterface=ZAP/8
customastdb=CF/80

[VIRTUAL/81]
type=extension
extension=81
label=Shawn-Cell
context=from-internal
queuecontext=from-internal
rtmp=0
queuechannel=Local/81@from-internal/n|Penalty=0|MemberName=Shawn-Cell
customastdb=CF/81

[ZAP/9]
type=extension
extension=90
label=Darrell-Upstairs
mailbox=90@default
context=from-internal
queuecontext=from-internal
extenvoicemail=*90@default
rtmp=0
queuechannel=Local/90@from-internal/n|Penalty=0|MemberName=Darrell-Upstairs|StateInterface=ZAP/9
customastdb=CF/90

[VIRTUAL/91]
type=extension
extension=91
label=Darrell-Cell
context=from-internal
queuecontext=from-internal
rtmp=0
queuechannel=Local/91@from-internal/n|Penalty=0|MemberName=Darrell-Cell
customastdb=CF/91

[VIRTUAL/94]
type=extension
extension=94
label=Brian-Cell
context=from-internal
queuecontext=from-internal
rtmp=0
queuechannel=Local/94@from-internal/n|Penalty=0|MemberName=Brian-Cell
customastdb=CF/94

[ZAP/10]
type=extension
extension=100
label=Conference-Upstairs
context=from-internal
queuecontext=from-internal
rtmp=0
queuechannel=Local/100@from-internal/n|Penalty=0|MemberName=Conference-Upstairs|StateInterface=ZAP/10
customastdb=CF/100

[ZAP/11]
type=extension
extension=110
label=General-Area-Upstairs
context=from-internal
queuecontext=from-internal
rtmp=0
queuechannel=Local/110@from-internal/n|Penalty=0|MemberName=General-Area-Upstairs|StateInterface=ZAP/11
customastdb=CF/110

[ZAP/12]
type=extension
extension=120
label=Shop-3
context=from-internal
queuecontext=from-internal
rtmp=0
queuechannel=Local/120@from-internal/n|Penalty=0|MemberName=Shop-3|StateInterface=ZAP/12
customastdb=CF/120

[PARK/default]
type=park
extension=70
label=PARK/default
context=parkedcalls
queuecontext=from-internal
rtmp=0

[RINGGROUP/600]
type=ringgroup
extension=600
label=Main Ring Group
context=ext-group
queuecontext=from-internal
rtmp=0

[ZAP/23]
type=trunk
label=ZAP/23
queuecontext=from-internal
rtmp=0

[ZAP/22]
type=trunk
label=ZAP/22
queuecontext=from-internal
rtmp=0

[ZAP/21]
type=trunk
label=ZAP/21
queuecontext=from-internal
rtmp=0

I'm sure I'm bloody close. It must be something simple by this point.

Thanks for your help so far.

NOTHING SHOWS? or just Dahdi? Do you have sip extensions? Do you see any activity for them? IF nothing shows, you most probably have problems with your asterisk manager settings.

/usr/local/fop2/fop2_server --test

That will test the manager connection. Also be sure you have all permissions in /etc/asterisk/manager.conf

I see buttons of my extensions but no activity at all. I do not have any sip extensions. I do have some fake extensions that I am using for forwarding to cell phones using follow me but they are simple.

Here is my manager.conf (user/pass changed).
-----------------------------------
[general]
enabled = yes
port = 5038
bindaddr = 0.0.0.0
displayconnects=no ;only effects 1.6+

[admin]
secret = ******
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = system,call,log,verbose,command,agent,user,config,command,dtmf,reporting,cdr,dialplan,originate
write = system,call,log,verbose,command,agent,user,config,command,dtmf,reporting,cdr,dialplan,originate

#include manager_additional.conf
#include manager_custom.conf
-----------------------------------

There is nothing in manager_additional.conf and manager_custom.conf.

For u/p comparison, here is my fop2.cfg
-----------------------------------
[general]
; AMI definitions
manager_host=0.0.0.0
manager_port=5038
manager_user=admin
manager_secret=****
;event_mask=agent,call,command,system,user,dialplan

; Daemon definitios
;listen_port = 4445
;restrict_host = http://www.asternic.org
;web_dir = /var/www/html/operator/fop2

; Global Config
poll_interval = 86400
poll_voicemail = 1
monitor_ipaddress = 0

; Force blind transfer on asterisk 1.6
blind_transfer = 1

; Force supervised transfer on asterisk 1.4
; requires the atxfer manager backport patch
; supervised_transfer = 1

; Force delimiter for asterisk applications
; force_parameter_delimiter = ","

; When adding or removing members to a queue, fop2 will default to
; AddQueueMember/RemoveQueueMember commands. If you set use_agentlogin
; to 1, together with the QueueChannel in a button definition set to
; an Agent number it will use AgentCallbackLogin and Agentlogoff instead.
;
; use_agentlogin = 0

; Master Password that overrides any individual one
;master_key = 5678

; Options to send to chan_spy when doing a Listen action
; This global setting is overriden by the individual button
; spyoptions directive if set (in the button config).
; Asterisk 1.6.1 or higher has the option "d" that lets you
; switch spying modes using the keypad:
;4 = spy mode
;5 = whisper mode
;6 = barge mode
spy_options="bq"

; Options to send to chan_spy when doing a Whisper action
; In Asterisk 1.6.1 or higher you can use B to enable barge (speak
; to both channels on a call).
whisper_options = "w"

; When you spy to an ongoing call, your spy session will end as
; soon as the conversation you are listening to finishes. If you
; rather keep the chan spy session open after the call end, uncomment
; the following line.
;persistent_spy=1

; Filename to use when start monitoring, you can use ${UNIQUEID},
; ${ORIG_EXTENSION}, ${DEST_EXTENSION}
; and date formats %Y %m %d to construct the filename.
;
; Settings for modifying the recording filename
; Available variables are:
; ${UNIQUEID} = Unique Id of the call
; ${TIMESTAMP} = Unix Timestamp when the recording was initiated
; ${CLIDNUM} = Callerid or Dialed number for the active call
; ${CLIDNAME} = Callerid name for the active call
; ${DEST_EXTENSION} = Target extenstion being monitored
; ${ORIG_EXTENSION} = Extension/User that started the recording (not
; the other leg)
; ${MBOX} = Mailbox of the extension/user that started the
; recording
; ${FOP2CONTEXT} = FOP2 Panel Context
;
; Date variables:
; %Y 4 digits year
; %y 2 digits year
; %m 2 digits month
; %d 2 digits day
; %h 2 digits hour
; %i 2 digits minute
; %s 2 digits seconds

; For elastix Monitoring Tab:
; monitor_filename=g${DEST_EXTENSION}-${UNIQUEID}

; For fop2 recording interface
monitor_filename=/var/spool/asterisk/monitor/${ORIG_EXTENSION}_${DEST_EXTENSION}_%h%i%s_${UNIQUEID}
monitor_format=wav
monitor_mix=true

; To enable the recording interface you must uncomment the following
; line, but also you might need to modify the script a little bit
; depending on the sox version you have installed.
;
;monitor_exec=/usr/local/fop2/recording_fop2.pl

; You could specify your own script to be executed when the recording
; is finished. It will receive 3 parameters, the complete
; path and filename of the IN leg, the OUT leg and the final
; recording NAME. You should run soxmix in your script to join
; the recordings into one file.
;
; monitor_exec=/var/lib/asterisk/bin/postrecording-script.sh

; FOP2 can fire notifications/popups when an extension or queue
; member receives a call. The default behaviour is to show a
; notification on state RINGING (notify_on_ringing=1).
;
; To customize notifications, you must uncomment the custom_popup
; function in checkdir.php you can replace that notification with
; a custom popup function to integrate with other web applications.
;
; For call centers you might need to perform a popup not on the
; RINGING state but when the call is CONNECTED to an agent. If you
; set in the queue configuration in queues.conf the option
; eventwhencalled=yes and then set here notify_on_connect=1,
; fop2 will send notifications on queue connected calls
; during AGENTCONNECT events. This will only work for inbound calls
; from a queue.
;
; notify_on_ringing = 1
; notify_on_connect = 1

; Call pickup uses the pickupmark variable by default. In multi tenant
; systems this might lead to problems as you might end un picking up
; some other tenant call. In that case you might want to try to
; pickup the call by its context uncomenting the following line:
;
; no_pickupmark=1

; If your asterisk version supports the pickupchan application it is
; much better to use this than the regular pickup application as it will
; be directed towards the channel and not the extension, makeing it
; more precise.
;
; use_pickupchan=1

; Path to your voicemail directory
; For voicemail to work the fop2 server must run on the same server
; as asterisk, or your voicemail directory must be network mounted
voicemail_path=/var/spool/asterisk/voicemail

; By default IM chats are not logged/saved. If you uncomment
; the following parameter, all chats will be stored on the chatlog
; table inside the fop2settings.db sqlite database.
;
; save_chat_log=1

; Khomp GSM interface to send SMS messages
; If there is a card plugged, fop2 will auto discover it
; and use the first one available. If you want to change it
; to a fixed one, uncomemnt the folowing line and change the name
; to your liking
;
; khomp_gsm=Khomp/b0

; --- SAMPLE GROUPS ---
; group=queues:QUEUE/100,QUEUE/101
; group=deptA:SIP/100,SIP/101,SIP/102
; --- END SAMPLE ---

; --- SAMPLE USER LIST ---
; format: user= EXTENSION : SECRET : PERMISSIONS : GROUPS
; You can enumerate several permissions and groups separated by comma
; available permissions: 'all', 'dial', 'hangup', 'meetme', 'pickup',
; 'record', 'spy', 'transfer', 'whisper',
; 'queuemanager', 'queueagent', 'phonebook',
; 'chat', 'preferences', 'hangupself',
; 'recordself', 'voicemailadmin'
;
; user=620:1234:all:queues
; user=621:1234:dial,transfer,pickup:deptA
; user=622:1234:all
; user=623:1234:meetme,pickup
; buttonfile=buttons.cfg
; ------ END SAMPLE ------

; This line is NOT commented, it executes
; the autoconfig configuration for FreePBX
#exec autoconfig-users-freepbx.sh

-----------------------------------

I'm a little confused again.

You said a range goes in the channel spots?

Here is my situation. I have 3 trunks. Lets call them ZAP/21, ZAP/22, and ZAP/23. They happen to be on channel 21, 22, and 23 (or pinned out as such on my Digium TDM2400P as Port 21, 22, and 23)

Does each one get their own channel number? IE: OUT_2, Labeled:ZAP/23, Privacy:None, Zap/Dahdi Channels (Eg: 1-24): 23

Yes. I was talking about trunks. Sorry, I was new to the interface so I got the channels and trunks mixed up. I'll give it a go tomorrow.

Oh ok. I'll take another look.

What about channels? None of my zap channels (extensions) show any activity either. Nothing seems to be monitored. I'm sure I'm missing a simple setting but if you could point me in the right direction, that would be great!

In a perfect world, I could see if someone is on a certain phone at any time.

Thanks!

PS: Fantastic project! Keep up the good work.